free · no sign-in
Paver patio cost calculator
Type the patio size. We price the pavers, the base under them, the digging and the labor, with the source and date of every price.
Published installed ranges disagree by about 2×: HomeGuide $10 to $17 per ft² (Sep 2024 data), Homewyse $21.74 to $28.49 per ft² (May 2026). Our defaults land between the two, nearer Homewyse.
See a paver patio on your own yard. Upload a photo, draw where it goes.
Do this for a whole design. Draw the patio on a photo of the yard and the area fills itself in.
Try it on my yardQuestions people ask
How much does a 12x12, 16x20 or 20x20 paver patio cost?
At our defaults, national average labor rate, a 12×12 patio (144 ft²) comes to about $3,800, a 12×16 (192 ft²) about $5,100, a 16×20 (320 ft²) about $8,500 and a 20×20 (400 ft²) about $10,600. That is roughly $26.50 per ft² each time, because every line in the calculator scales with area. These are our defaults, not quotes. Change the paver price and the state to see yours.
Why is labor more than half the price?
At our defaults labor is 53% of the total. The crew digs out about 7 inches or more, spreads and compacts the base in lifts, screeds the sand, lays the pavers and cuts the edges. Very little of that is the pavers themselves. HomeGuide's labor breakdown puts installation at $6.25 to $10.90 per ft², which is a similar picture.
How deep should the base be?
The ICPI minimum for a patio is 4 inches of compacted aggregate, with 1 inch of bedding sand and pavers at least 2⅜ inches thick. Homewyse prices its basic job with a 6 inch base. Go deeper on clay soil or where the ground freezes, and ask your installer what they do locally.
Are pavers or poured concrete cheaper?
Concrete is cheaper. Homewyse (May 2026) lists a broom-finish concrete patio at $10 to $13 per ft² and interlocking pavers at $22 to $28 per ft². Pavers cost more up front but can be lifted and re-laid when a section settles.
Is this the price I should charge?
Switch to "I'm the pro". It uses the same model as our sod calculator: materials, haul-off and your labor cost, plus a markup for overhead and profit. The labor wage and markup start at the sod calculator's values. Set them to your own.
Does this store my numbers?
No. Everything is computed in your browser. Nothing is sent or saved, and there is no sign-in. The copy-link button puts your inputs in the address so you can send the estimate to somebody.
The plus or minus 15% band is our arithmetic, not a market survey. Prices change; check yours with a local supplier and get written quotes.